空间目标监视雷达信号频率的优选准则

随着在轨微小卫星及空间碎片数量不断增加，为保证在轨卫星的运行安全，需要对微小目标进行有效跟踪探测及稳定编目。雷达作为近地空间目标监视的主用设备，在对厘米级小目标进行探测跟踪时，其工作频率是决定其能否可靠探测关键因素，高频有利于探测小目标，并可获得相对稳定的RCS，但高频信号的波束小、搜索能力较低，实现难度大，也使得成本过高。为适于实际工程应用，需从效费比出发，对频率进行优选。本文从目标RCS的角度提出一种空间目标监视雷达信号频率的优选准则，给出该准则下周长波长比ka的取值范围。为了更加清楚地说明该优选准则的应用，给出了直径5 cm和10 cm的目标在该准则下信号频率的取值范围，并与国外工作做了比较，证明该准则可行。     

Semi-supervised gear fault diagnosis using raw vibration signal based on deep learning

In aerospace industry, gears are the most common parts of a mechanical transmission system. Gear pitting faults could cause the transmission system to crash and give rise to safety disaster. It is always a challenging problem to diagnose the gear pitting condition directly through the raw signal of vibration. In this paper, a novel method named augmented deep sparse autoencoder (ADSAE) is proposed. The method can be used to diagnose the gear pitting fault with relatively few raw vibration signal data. This method is mainly based on the theory of pitting fault diagnosis and creatively combines with both data augmentation ideology and the deep sparse autoencoder algorithm for the fault diagnosis of gear wear. The effectiveness of the proposed method is validated by experiments of six types of gear pitting conditions. The results show that the ADSAE method can effectively increase the network generalization ability and robustness with very high accuracy. This method can effectively diagnose different gear pitting conditions and show the obvious trend according to the severity of gear wear faults. The results obtained by the ADSAE method proposed in this paper are compared with those obtained by other common deep learning methods. This paper provides an important insight into the field of gear fault diagnosis based on deep learning and has a potential practical application value.     

一种高动态低信噪比卫星导航信号捕获方法

为提升高动态低信噪比环境下卫星导航信号的捕获性能,提出了一种基于分数阶傅里叶变换(FrFT)及部分匹配滤波(PMF)的捕获方法。在该方法中,接收机首先利用PMF对接收信号做分段相干积分,随后借助快速傅里叶变换(FFT)对分段积分结果做离散快速FrFT,最后通过检测FrFT输出的峰值完成信号的捕获。由于具有多普勒频率变化率的卫星导航信号在FrFT后呈现能量聚焦特性,所提方法能够显著提高信号的长时间相干积分增益。同时对所提算法的捕获概率、平均捕获时间以及算法复杂度等性能指标进行了理论分析及计算机仿真验证。仿真表明,与传统的PMF-FFT方法相比,所提方法能够通过延长相干积分时间的方式有效提升高动态低信噪比卫星导航信号的捕获概率、降低捕获时间。     

Substitution of satellite-based land surface temperature defective data using GSP method

Land surface temperature (LST) as an important environmental variable provides valuable information for earth environmental system modelling. Currently, LST is obtained through satellite thermal sensors at various spatial and temporal resolutions. Although spatially continuous satellite-based LST measurements are intended to overcome the shortcomings of sparse ground-based LST measurements, LST images often contain anomalous values due to the existence of clouds or sensor malfunctioning. The problem becomes more serious where the users deal with high spatial resolution characterized by low temporal resolution. This study examines the capability of a newly developed graph signal processing (GSP) method using two-dimensional single-date thermal data. For this purpose, four Landsat/TIRS datasets are analyzed. The data of five elliptical regions on thermal images are eliminated and then reconstructed through the GSP method and using the LST values of the enclosing rectangles containing the ellipsoids. The results indicate that the temperature variation determined by the GSP method generally conforms to the original image LST values. According to a correlation test conducted on the original image LST and those obtained through the GSP method, the values vary from 58% to 95%, which is an above-the-average rate (RMSE from 0.69 to 2.27). The statistical analysis of the original image LST in both the elliptical regions and the enclosing rectangles containing the ellipsoids indicates that an increase in the variance of LST data causes an increased error in the calculation of temperature by the GSP method, and vice versa. The results of the analysis of variance (ANOVA) and Duncan test indicated that an increase in the number of the non-zero spectral bins would result in increased RMSE values for all the dates and the regions. Moreover, the model errors were significant at the 0.05 level across all the image date and five elliptical study regions. Based on the results, the use of this method is recommended for the reconstruction of LST missing values, where dissimilarity of atmospheric conditions limits the use of other methods that depend on the time series data of various dates and a great deal of data calculation.     

谐振式加速度计自激振荡电路性能评价方法的研究

针对谐振式加速度计成品率不高、精度低等问题，以石英振梁加速度计为例，采用引进标准信号，将谐振电路作为“黑盒子”，对其开展独立的评价。通过评价电路的驱动电压幅值稳定性、移相稳定性、全温幅值/相位对称性等指标，与加速度计实际指标建立了一一对应的关系，为加速度计研制与性能提升提供了有效依据。实际运用表明，电路噪声性能、温度性能大幅提升，产品成品率从70%提高到了约90%。     

Direction finding for two-dimensional incoherently distributed sources with Hadamard shift invariance in non-uniform orthogonal arrays

This paper proposes a novel algorithm for Two-Dimensional (2D) central Direction-of-Arrival (DOA) estimation of incoherently distributed sources. In particular, an orthogonal array structure consisting of two Non-uniform Linear Arrays (NLAs) is considered. Based on first-order Taylor series approximation, the Generalized Array Manifold (GAM) model can first be established to separate the central DOAs from the original array manifold. Then, the Hadamard rotational invariance relationships inside the GAMs of two NLAs are identified. With the aid of such relationships, the central elevation and azimuth DOAs can be estimated through a search-free polynomial rooting method. Additionally, a simple parameter pairing of the estimated 2D angular parameters is also accomplished via the Hadamard rotational invariance relationship inside the GAM of the whole array. A secondary but important result is a derivation of closed-form expressions of the Cramer-Rao lower bound. The simulation results show that the proposed algorithm can achieve a remarkably higher precision at less complexity increment compared with the existing low-complexity methods, which benefits from the larger array aperture of the NLAs. Moreover, it requires no priori information about the angular distributed function.     

基于Hilbert-Huang变换的航天器发射段力学环境分析

文章基于Hilbert-Huang变换,对某载人航天器发射过程中整流罩分离期间测量的力学环境参数进行处理分析,利用HHT的基函数自适应性特点,得到振动时间历程信号的时频域Hilbert谱,准确识别出信号主频率及对应时间范围。此应用案例可为地面力学试验条件制定以及运载接口条件确定提供参考。     

正弦压力信号幅值测量无差算法研究

正弦压力校准常用比较法，通过比较标准压力传感器与被校压力传感器在同一正弦压力源中的响应完成被校传感器的幅值校准。对正弦压力信号幅值的测量算法进行了研究，提出了一种控制采样频率为标准激励信号频率整数倍的算法，可实现幅值的无差运算，理论推导和仿真实验表明，该算法能有效提高单频校准的准确度。     

未知互耦条件下混合信号波达方向估计

阵列天线互耦对导向矢量的扰动以及信号相干性对数据协方差矩阵造成的秩损,使得基于子空间正交性原理的超分辨波达方向估计(Direction-of-Arrival,DOA)算法性能恶化,甚至失效。针对这一问题,提出一种在相干与非相干信号混合状态下无需阵列互耦补偿的特征矢量平滑DOA估计算法。该算法对部分阵元接收数据的协方差矩阵特征分解,将得到的特征矢量平滑处理后构造等效协方差矩阵,抑制阵列互耦影响的同时完成混合信号DOA估计。在阵列互耦和信号相干性均未知的条件下,正确估计了信号DOA,无需互耦参数估计或补偿。计算机仿真结果验证了算法的有效性。     

穿过外涵机匣的管路结构设计

随着对航空发动机的引气、供油、点火、测试等功能要求的提高,穿过外涵机匣的传感器和管路数量大大增加,为降低外涵机匣拆装的难度,提高穿过外涵机匣的管路的可装配性,在原有管路的连接结构、密封结构、补偿结构、分解维护4个方面的结构设计基础上,设计了2种新型穿过外涵机匣的管路结构,新型管路具有结构简单、拆装便捷、安全可靠、互换性好等优点,可满足管路补偿和外涵机匣的密封要求。